Product Overview
CADDY® CAT HP 1 in. Dia. J-Hook Assembled to 360 Degree BC200 Beam Clamp, 1/2 in. Max. Flange, Load Rating 60 lb.
- Rotates 360 Degrees to Support Various Directional Runs of Cable
- Provides Optimal Support For High-Performance Data Cable, Up to and Including Cat 5e, Cat 6, Cat 6A, Cat 7 and Fiber Optic
- Provides Superior Fill Capacity and Load Rating Over Most Other Non-Continuous Cable Support Alternatives
- Rounded Edges on J-Hooks Provide Proper Bend Radius Support For High Performance Data Cables
- Cost-Effective Alternative to Expensive Cable Tray
- Complies With EN 50174-2
- Meets ISO/IEC 14763-2, TIA 568-C and TIA 569-C
- Set-Screw Must be Tightened and Torqued Onto the Sloped Side of the I-Beam
- Non-Continuous Supports May Not Exceed Spacing of 5 ft. (1.5m) Per TIA 569-C.9.7
- Cable Capacity is Calculated Based On a 70% Fill Rate
General Information
Name : nVent CADDY CAT16HPBC200B Cat HP J-Hook Assembled to 360° BC200 Beam Clamp, 1" Diameter 1/2" Flange , nVent CADDY
Category : J-Hooks
UPC Code : 078285679362
Country of Origin : United States. Country of origin is subject to change.
Specifications
General Information
ADI Part Number : BF-CAT16HPBC
Brand Name : Caddy
Manufacturer : ERICO International Corporation
Manufacturer Part Number : CAT16HPBC200B
Packaged Quantity : 50
Product Name : Cat HP J-Hook with BC200 Beam Clamp, Swivel
Product Type : Cable Tying
Technical Information
Material : Electrogalvanized, Galvanized, Steel
Physical Characteristics
Internal Diameter : 1"
Thickness : 0.5"
